How To Change The Battery In A Exergen Thermometer

Best Answer:

  1. Locate the battery door on the back of the thermometer.
  2. Open the battery door by sliding it down.
  3. Remove the old batteries from the compartment.
  4. Insert two new AA batteries into the compartment, making sure that the +/- symbols on the batteries are aligned correctly.
  5. Close the battery door by sliding it up.

Exergen Smart Glow Thermometer – How to Replace Battery

Change Battery For Exergen TemporalScanner

What tools do I need to change the battery in my Exergen thermometer?

In order to change the battery in your Exergen thermometer, you will need a screwdriver and a new AA battery. First, use the screwdriver to remove the screw on the back of the thermometer. Then, take out the old battery and insert the new one. Finally, screw the back of the thermometer back on.

See also  How To Fix Dab Pen Wires Broke

How do I open the battery compartment of my Exergen thermometer?

To open the battery compartment of an Exergen thermometer, first remove the cap from the end of the thermometer. Then, unscrew the battery compartment cover and remove it. Inside, there will be a small tab that must be lifted in order to release the batteries.

What type of battery does my Exergen thermometer use?

The Exergen temporal artery thermometer uses two AA batteries.

How do I know when the battery in my Exergen thermometer needs to be changed?

The Exergen TemporalScanner will take 60,000 readings before the battery needs to be changed. A low battery indicator will appear on the screen when there are only 1,000 readings remaining.

How do I safely remove the old battery from my Exergen thermometer?

To safely remove the old battery from your Exergen thermometer, first remove the cap from the end of the thermometer. Next, use a coin to gently unscrew the battery cover. Be careful not to lose the small O-ring that may be attached to the cover. Once the cover is removed, the old battery can be removed and a new one can be inserted in its place.

How do I install the new battery in my Exergen thermometer?

To install the new battery in your Exergen thermometer, first, unscrew the back cover of the device. Next, remove the old battery and insert the new one into the compartment, taking care to align the positive and negative sides correctly. Finally, screw the back cover back on, being careful not to overtighten it.

See also  How To Fix A Broken Infinity Cube

What should I do with the old battery from my Exergen thermometer?

If your old battery is a alkaline battery, you can simply throw it away. If your old battery is a lithium battery, you need to take it to a special facility for recycling.

How do I test my Exergen thermometer to make sure the new battery is working?

There are a few ways to test your Exergen thermometer to make sure the new battery is working. The first way is to remove the back cover of the thermometer and press the test button. The second way is to take the thermometer apart and look for the small battery icon on the circuit board. If the battery is working, the icon should be lit up. The third way is to use a multimeter to test the voltage of the battery.

What are some troubleshooting tips for changing the battery in my Exergen thermometer?

There are a few troubleshooting tips to keep in mind when changing the battery in your Exergen thermometer. First, make sure that you have the correct type of battery. The Exergen thermometer uses a CR2032 3-volt lithium coin cell battery. Second, if the battery is not inserted correctly, the display on the thermometer will be blank. Make sure that the positive side of the battery (the side with the plus sign) is facing up when you insert it. Finally, if the thermometer still isn’t working after you’ve changed the battery, try resetting it by removing and then re-inserting the battery.

Where can I find more information on changing the battery in my Exergen thermometer?

You can find more information about changing the battery in your Exergen thermometer by contacting customer service or by looking online for a user manual.

See also  How To Install Supervent Ceiling Support Kit