- Unplug the washer from the power outlet.
- Remove the two screws from the back of the washer.
- Lift the top of the washer off.
- Locate the control board on the left side of the washer.
- Remove the two screws holding the control board in place.
- Pull the control board out.
- Inspect the wiring on the control board.
- Replace the control board if it is damaged.
- Reverse the steps to reassemble the washer.
CONTENTS
TESTING VGT ELECTRICAL// CODE U010C- LOSS of Communication RAM 5500 Cummins 6.7 #diesel #truck
Ram Turbo Actuator Replacement- 6.7 Cummins U010C
FAQ
What is the u010c code?
The u010c code is a Unicode character that represents a non-breaking space. Non-breaking spaces are used to keep text from wrapping to the next line.
What are the symptoms of the u010c code?
The u010c code is a diagnostic trouble code (DTC) for a fault in the communications between the electronic control unit (ECU) and the torque converter clutch solenoid. This code is set when the ECU detects a loss of communication with the torque converter clutch solenoid. Symptoms of this code include the transmission slipping, the engine revving without the vehicle moving, and the transmission shifting erratically. If this code is set, it is important to have the vehicle diagnosed and repaired as soon as possible to avoid further damage to the transmission.
What are the causes of the u010c code?
The code u010c indicates that there is an issue with the communications between the control module and the body control module. This can be caused by a number of things, including a faulty control module, a faulty body control module, or a problem with the wiring between the two modules.
How do you fix the u010c code?
There is not a single answer to this question as the u010c code can be caused by a variety of issues. Some potential causes of the u010c code include a faulty sensor, a dirty or Obstructed Mass Air Flow (MAF) sensor, a vacuum leak, or a problem with the engine management system. The first step in troubleshooting the u010c code is to check for any loose or damaged vacuum hoses as these can cause a leak. If no vacuum leaks are found, the next step would be to clean or replace the MAF sensor. If the u010c code persists after taking these steps, it may be necessary to consult a professional mechanic or automotive technician for further diagnosis and repairs.
What are the consequences of not fixing the u010c code?
If the u010c code is not fixed, it could lead to a number of consequences, including a loss of power, performance issues, and even engine failure. In extreme cases, it could also lead to a fire. Therefore, it is important to fix the u010c code as soon as possible to avoid any potential problems.