How To Fix Water Ponding On Concrete

Best Answer:

  1. Remove any debris from the ponding area with a rake or broom.
  2. Inspect the area for cracks or other damage.
  3. If necessary, repair any cracks or damage with concrete patching material.
  4. If the ponding area is still not draining properly, you may need to install a drainage system.
  5. Contact a professional if you are unsure about how to proceed.


Proper Concrete Repair for Negative Slope. How to Fix Drainage Issues the Right way.

How do you fix a low spot on a concrete driveway?

A low spot on a concrete driveway can be fixed by using a concrete patching compound. The best type of compound to use is one that is made specifically for repairing concrete. These products can be found at most hardware stores.

To repair the low spot, the first step is to clean out the area. This means removing any loose debris or dirt. Once the area is clean, the patching compound can be applied. It is important to follow the manufacturer’s instructions when applying the compound.

See also  How To Install A Dishwasher Under A Quartz Countertop

After the patching compound has been applied, it will need to cure for a period of time. During this time, it is important to keep traffic off of the repaired area. Once the compound has cured, the low spot should be gone and your concrete driveway will be as good as new!

How do you fix a low spot in a concrete walkway?

To fix a low spot in a concrete walkway, you will need to remove the affected area of concrete and then pour new concrete in its place. Be sure to taper the new concrete so that it slopes away from the walkway. This will help to prevent water from pooling in the low spot.

What happens when water sits on concrete?

Water sitting on concrete can cause a number of problems. First, it can seep into cracks and crevices in the concrete, causing the concrete to weaken and crumble. Second, it can freeze, expanding and causing the concrete to crack. Third, it can cause mold and mildew to grow, which can lead to health problems. Finally, it can attract insects and other pests.

How do you divert water on concrete?

If you want to divert water on concrete, you can do so by using a variety of methods. One way to do this is to use a water diverter. This is a device that is placed in the path of the water and diverts it away from the concrete. Another way to divert water is to use a trench drain. This is a type of drain that is designed to catch and redirect water away from concrete surfaces.


What is the best way to fix water ponding on concrete?

There are a few ways that you can fix water ponding on concrete. One way is to use a backyard garden hose to direct the water away from the house. Another way is to use a sump pump to remove the water from the area.

See also  How To Fix Hydro Flask Dent

What are the most common causes of water ponding on concrete?

There are many possible causes of water ponding on concrete, but some of the most common include:

1) Poor drainage around the concrete slab. This can be caused by a variety of factors, including improper grading, clogged drains, or compacted soil.

2) Leaks in the concrete slab itself. These leaks can be caused by cracks or joints in the concrete that are not properly sealed.

3) Atmospheric conditions. Ponding can sometimes be caused by heavy rains or melting snow/ice.

4) Hydrostatic pressure. This is often caused by underground water sources, such as a high water table or springs.

How can I prevent water ponding on my concrete in the future?

Water ponding on concrete is typically caused by improper grading around the foundation of a home or building. When rainwater falls, it should be directed away from the foundation through a series of gutters and downspouts. If the ground around the foundation is not graded properly, water will pool around the foundation and seep into the basement or crawlspace.

There are a few things you can do to prevent water ponding on your concrete in the future:

1. Make sure the ground around your foundation is graded properly. This will ensure that water is directed away from the foundation and does not have a chance to pool around it.

2. Install a French drain system around the perimeter of your foundation. This will collect any water that does seep in and direct it away from the foundation.

See also  How To Install Bubble Wrap Under Metal Roofing

3. Make sure your gutters and downspouts are in good working condition and are directing water away from the foundation.

4. If you have a sump pump in your basement, make sure it is in good working condition and is draining water away from the foundation.

Will fixing water ponding on my concrete be expensive?

The cost of fixing water ponding on concrete will vary depending on the extent of the problem and the chosen method of repair. If the ponding is caused by cracks or damage to the concrete, repairs will be necessary. These can range from simple patching to more extensive work such as resurfacing. If the ponding is due to poor drainage, solutions may include installing a new drainage system or correcting the grade of the area around the concrete. In some cases, raising the concrete may be the only way to fix the problem. This is a more expensive option, but it may be the only way to ensure that the ponding does not recur.

What are the consequences of not fixing water ponding on concrete?

When water ponding occurs on concrete, it can lead to a number of negative consequences. If the ponding water is allowed to stand for too long, it can cause the concrete to deteriorate and even crumble. Additionally, ponding water can also lead to the growth of mold and mildew, which can cause serious health problems if inhaled. In extreme cases, ponding water can even cause the formation of sinkholes. Therefore, it is important to fix any water ponding on concrete as soon as possible to avoid these negative consequences.